biomass pellet dryer
Biomass pellet dryer is the essential parts of biomass pellet production line. Biomass powder moisture content 15% like sawdust and other raw materials, usually can be made biomass pellets. A set of drying system consists of two parts. One is furnace also called heat stove which provids heat source for drying raw material; Another is dryer which dries to 15% moisture by the hot air from the furnace. The material is fed into the dryer by a screw conyor and rotated in the dryer. Dryer is a cylinder with slantwise slightly. The rotate speed can be adjustable. Raw material are fed into cylinder and then are well-distributed and dispersed after turned over by shovling plate. Finally the material is contacted with the hot air fully, the drying is acierated. (Tips: Shoveling plate can be selected to meet various material according to client's needs.)
Model | Diameter (mm) | Length(m) | Power(kw) | Rotation Speed (r/min) |
HKD6 | 600 | 4,5,6,7,8 | 3-5.5 | 3-20 adjustable |
HKD 8 | 800 | 4,5,6,7,8,9,10 | 5.5-7.5 | |
HKD10 | 1000 | 6,7,8,9,10,11,12 | 5.5-7.5 | |
HKD 12 | 1200 | 6,8,10,12,14,16 | 7.5-11 | |
HKD 15 | 1500 | 8,10,12,14,16,18 | 11-15 | |
HKD 18 | 1800 | 8,10,12,14,16,18,20 | 15-18.5 | |
HKD 22 | 2200 | 10,12,14,16,18,20,22,25 | 18.5-22 | |
HKD 24 | 2400 | 12,14,16,18,20,22,25 | 22-30 |
Technical parameter
item(m)
|
priductive capacity(t/h)
|
revolution(r/min)
|
motor power(Kw)
|
install angle(.)
|
Temp.of final
|
Φ1.0×5.0
|
0.5-1.2
|
0.6-6
|
4
|
3-5
|
≤1.5%
|
Φ1.2×6-10
|
1.5-3
|
0.6-6
|
5.5
|
3-5
|
≤1.5%
|
Φ1.5×12-18
|
3-5.5
|
0.6-6
|
15
|
3-5
|
≤1.5%
|
Φ1.8×12-18
|
5-6.5
|
0.6-6
|
18.5
|
3-5
|
≤1.5%
|
Φ2.2×12-22
|
7-12
|
0.6-6
|
22
|
3-5
|
≤1.5%
|
Φ2.4×15-20
|
9-15
|
0.6-6
|
30
|
3-5
|
≤1.5%
|
Φ3.0×25
|
16
|
0.6-6
|
55
|
3-5
|
≤1.5%
|
Specialities:
Adopt international advanced technology, high efficiency, low nosie
Adopt hot air stove drying technology, selected chunks of raw material recycled as energy
1t/h raw material
Low energy consumption, stable operation, reliable drying process